Navigation Server (v1.0.1)

[Ramoncito]

What error is that EADDRINUSE?

[Xantiv]

getting tcp listening error: EADDRINUSE anyone know anything about it?


edit: fixed it changed port

[Xantiv]

well sorry for dubble post but, now i cant start the server, the window pops up then just close it self any idea?

[Dehan]

well sorry for dubble post but, now i cant start the server, the window pops up then just close it self any idea?

Probably redist is missing, Install Visual C++ Redistributable for Visual Studio 2015 (32 bits)

When downloading it there will be two options, you should download and install vc_redist.x86.exe

[Xantiv]

Probably redist is missing, Install Visual C++ Redistributable for Visual Studio 2015 (32 bits)

When downloading it there will be two options, you should download and install vc_redist.x86.exe

used it before and i installed that, had to redowload the server..

[warturtle]

Try disabling UPnP.

1. Open navserv.json
2. Change 'useUPnP' from 'true' to 'false.
3. Hit save
4. Start navserv.

After I start navserv, what do I do? How do I connect it to the server? Should I use windbot's navigation and type in the server IP?

[Josh]

After I start navserv, what do I do? How do I connect it to the server? Should I use windbot's navigation and type in the server IP?

If you're running Windbot and the navigation server on the same computer, you can connect to it using 127.0.0.1:XXXX (set XXXX to whatever port you've specified in your navserv.json file). If it's on another host, you might have to open up the required ports on the firewall, but you use the IP address of the machine the navigation server is hosted on.

[Imba]

Ok genius of computers "nat" you are saying the navi is only for computers students?? And the navi is not for free users is for premmys because i need the license for i can acces to navi options on the bot -.- AND i will try to change the upn tru to falce u.u

Internet should be forbidden for people who cant use google.

[warturtle]

If you're running Windbot and the navigation server on the same computer, you can connect to it using 127.0.0.1:XXXX (set XXXX to whatever port you've specified in your navserv.json file). If it's on another host, you might have to open up the required ports on the firewall, but you use the IP address of the machine the navigation server is hosted on.

Thanks!!

[glowingstick]

@dimasdagama