Navigation Server (v1.0.1)

Printable View

Show 40 post(s) from this thread on one page

07-18-2016, 03:16 AM
Parcle

Quote:

Originally Posted by Dworak

They can you just need give them your IP

I did this, but they can't connect :S My friend is getting stuck on the "Connecting" page.
07-18-2016, 07:56 AM
Dworak

Quote:

Originally Posted by Parcle

I did this, but they can't connect :S My friend is getting stuck on the "Connecting" page.

https://forums.tibiawindbot.com/show...l=1#post409944

Check post of Josh
07-18-2016, 08:13 AM
Be happy

i'm not robot but it does speak in my language, good job.
07-18-2016, 08:35 AM
Riikos

I used to do my own server but now it isn't working anymore. No packet sent/received.
The fact we pay for the service and have to do alone is pretty boring.
I hope this will be compensated.
07-19-2016, 12:33 AM
Instinto Macabro

@Lucas Terra I'm having trouble creating navigation rooms, someone help me?
08-04-2016, 06:51 PM
filipivf

I know not set the navi binaries . I can open it , but I can not set up , you could send a print ? REP +
08-04-2016, 07:17 PM
Josh

Quote:

Originally Posted by Riikos

I used to do my own server but now it isn't working anymore. No packet sent/received.
The fact we pay for the service and have to do alone is pretty boring.
I hope this will be compensated.

The fact that you pay for a service is slightly irrelevant. After all, it is also customers who DDoS the servers. I'm not saying it's you, specifically, but you can't complain about "our side" when it's "your side" which make a public navigation server a requirement. This service is an extra, it was never guaranteed at the time the product was released. While we do everything we can to keep it running smoothly, there's a limit.

If you actually want support, tell us every piece of information you can. Until then, consider that you won't get further responses from us.

Quote:

Originally Posted by Instinto Macabro

I'm having trouble creating navigation rooms, someone help me?

Don't tag Lucas or any mods. It doesn't help, it doesn't speed up answers, and it's not remotely useful to any of us. What happens when you try to create a room? Any messages at all? Are you running the navi server as admin or under sudo? Which OS are you using? If you want support, try to support yourself first by looking at the situation you're in, and the potential risk.

Quote:

Originally Posted by filipivf

I know not set the navi binaries . I can open it , but I can not set up , you could send a print ? REP +

Can you provide some more information? Did you read the first post?
08-07-2016, 10:03 PM
Dzoszekk

I have windows XP. Is some chance to instal/start this NavServ file? When i try i have error NavServ is not a valid Win32 application.
08-07-2016, 10:37 PM
ozzix

Quote:

Originally Posted by Dzoszekk

I have windows XP. Is some chance to instal/start this NavServ file? When i try i have error NavServ is not a valid Win32 application.

No, XP is not supported
08-08-2016, 08:26 AM
guigo

i go open nav server and error: msvcp140.dll ... but in C:\Windows\System32 have the archive msvcp140.dll ... I tried to Install Visual C++ Redistributable for Visual Studio 2015 (32 bits)

but errror 0x80240017: erro nao especificado

please helpppppp
08-08-2016, 09:05 AM
Dzoszekk

So nice Visual C++ Redistributable for Visual Studio 2015 is working on windows XP. Only this NavSrev file need better system and ppl wit XP can't use navigation because official windbot navigation doesn't work.
08-08-2016, 02:41 PM
Lydka

Hey Guys
I have got problem my navi connected but i cant make room's in my own navi server
May any one help?
08-09-2016, 04:15 PM
Dzoszekk

Quote:

Originally Posted by XtrmJosh

If you're running Windbot and the navigation server on the same computer, you can connect to it using 127.0.0.1:XXXX (set XXXX to whatever port you've specified in your navserv.json file). If it's on another host, you might have to open up the required ports on the firewall, but you use the IP address of the machine the navigation server is hosted on.

How can i check, what is my required port?
08-09-2016, 06:28 PM
Josh

Quote:

Originally Posted by Dzoszekk

How can i check, what is my required port?

As per my previous post, check navserv.json.
08-09-2016, 08:22 PM
theanime

Ok my problem is when i try install Visual 2015 stay in this for long time and no send any msg already 2hrs there:
http://imgur.com/sGn4VX0

somebody know what happen or what can do?
08-09-2016, 11:11 PM
mladen

why i cant pay 3 days any more? by my mobile phone?? there is no more that option or?

i cant finde option to pay 3 days of wind bot by my mobilr phone, TEXT MESSAGE
08-13-2016, 04:07 PM
Ralphie

I can't create navi room manually also same problem with edit navserv.json .

http://i68.tinypic.com/2vxnnyw.jpg
08-14-2016, 10:13 AM
Ralphie

Help me with up post ^
@XtrmJosh @Lucas Terra @SuNe @Raphael @Dehan
08-14-2016, 04:09 PM
Matheus Santos

i can not connect the computer that is starting the NavigationHost , but can connect from another machine .

Does anyone know why ?
08-14-2016, 07:44 PM
Josh

Quote:

Originally Posted by Ralphie

I can't create navi room manually also same problem with edit navserv.json .

http://i68.tinypic.com/2vxnnyw.jpg

Have you tried the troubleshooting steps?

Quote:

Originally Posted by Matheus Santos

i can not connect the computer that is starting the NavigationHost , but can connect from another machine .

Does anyone know why ?

How are you trying to connect? Are you using localhost or 127.0.0.1 as the IP? Are the computers on the same network? Is the other machine on the same network?
08-22-2016, 12:06 PM
Dzoszekk

Hello, can someone tell me what shuld i write in Windbot-Navigation-Server IP, if i make server on second computer in my hause (I have the same ip on both computers). Shuld be 'localhost', my ruter ip, my host name or what.
08-22-2016, 01:25 PM
SuNe

Quote:

Originally Posted by Dzoszekk

Hello, can someone tell me what shuld i write in Windbot-Navigation-Server IP, if i make server on second computer in my hause (I have the same ip on both computers). Shuld be 'localhost', my ruter ip, my host name or what.

The other computers local IP address.

Open CMD and write "ipconfig"
IPv4 Address..... 192.168.*.* <-- That one

It could also be

IPv4 Address..... 10.121.*.*

Localhost or 127.0.0.1 only works if the server is hosted on the same computer.
08-25-2016, 03:40 PM
Lucas Terra

Fixed a crash when deleting dormant nav rooms, which was making it impossible to start the server up.
08-25-2016, 05:12 PM
Ahmudi

I just opened the NavServ on my own computer to use windbot here (same IP adress), but I can't connect to the server in Windbot, it's not working. Can someone help me?

IMAGE > http://imgur.com/a/0ZRrL
08-25-2016, 05:19 PM
Raphael

Quote:

Originally Posted by Ahmudi

I just opened the NavServ on my own computer to use windbot here (same IP adress), but I can't connect to the server in Windbot, it's not working. Can someone help me?

IMAGE > http://imgur.com/a/0ZRrL

Use 'localhost' to connect on a server hosted on the same machine.
08-25-2016, 05:47 PM
Ahmudi

Quote:

Originally Posted by Raphael

Use 'localhost' to connect on a server hosted on the same machine.

Tried with 'localhost'

Image > http://imgur.com/d0bAfIs

Not working :(
08-25-2016, 06:29 PM
Lucas Terra

@Ahmudi, you must specify the port, if you're not running on the default port 7175. So, in your case:

Code:

localhost:27015
08-25-2016, 07:49 PM
Ahmudi

Quote:

Originally Posted by Lucas Terra

@Ahmudi, you must specify the port, if you're not running on the default port 7175. So, in your case:

Code:

localhost:27015

:*** love you <3
08-25-2016, 10:16 PM
pokorovsky

ahh im noob if you talking about scripts you can make better tutorial cuz i rly dont understant that :(
08-26-2016, 04:07 AM
re mac

I have everything right now, can't start the navi.

http://imgur.com/a/ZsGZd
08-26-2016, 01:47 PM
Josh

Quote:

Originally Posted by re mac

I have everything right now, can't start the navi.

http://imgur.com/a/ZsGZd

Do you have UPNP enabled? And you've installed the redistributable package?
08-26-2016, 07:20 PM
Mazi

Quote:

Originally Posted by XtrmJosh

Do you have UPNP enabled? And you've installed the redistributable package?

Got same error
With or without UPNP
08-26-2016, 09:26 PM
Ralphie

I can connect to navi room bot dont see rooms and create it ....
08-26-2016, 09:45 PM
Mazi

Quote:

Originally Posted by re mac

I have everything right now, can't start the navi.

http://imgur.com/a/ZsGZd

Instal Full Visual Studio 2015 thats help me ! ;)
08-26-2016, 11:53 PM
re mac

Quote:

Originally Posted by Mazi

Instal Full Visual Studio 2015 thats help me ! ;)

http://imgur.com/a/pEjpe

Still the same error.

I have windows 8.1 64 bits, can be this the problem?
08-27-2016, 12:00 AM
re mac

Quote:

Originally Posted by XtrmJosh

Do you have UPNP enabled? And you've installed the redistributable package?

Tried with both options.

I have all the packages installed.
08-27-2016, 12:24 AM
Josh

Quote:

Originally Posted by re mac

Tried with both options.

I have all the packages installed.

OK, try install the redistributable package again, only this time select the option "vc_redist.x86.exe" instead of "vc_redist.x64.exe" - Your error message corresponds to trying to load a library which doesn't exist at startup, and the only reason it wouldn't exist is if you've not installed the right stuff. The instructions clearly say to install 32-bit, but I could see how you might miss that. I'm taking the assumption this will fix it :)
08-27-2016, 09:48 PM
re mac

Quote:

Originally Posted by XtrmJosh

OK, try install the redistributable package again, only this time select the option "vc_redist.x86.exe" instead of "vc_redist.x64.exe" - Your error message corresponds to trying to load a library which doesn't exist at startup, and the only reason it wouldn't exist is if you've not installed the right stuff. The instructions clearly say to install 32-bit, but I could see how you might miss that. I'm taking the assumption this will fix it :)

Tried again... Any other ideas?

http://imgur.com/a/9826x
08-27-2016, 10:05 PM
Josh

Quote:

Originally Posted by re mac

Tried again... Any other ideas?

http://imgur.com/a/9826x

Maybe try uninstall the 64-bit version. I still strongly suspect you're not paying close enough attention to my words :)
08-30-2016, 08:10 PM
re mac

Quote:

Originally Posted by XtrmJosh

Maybe try uninstall the 64-bit version. I still strongly suspect you're not paying close enough attention to my words :)

Like I've already posted there, I already unnistalled the 64-bits version and installed the 32-bits (x86).

I don't know that to do anymore... the only MS C++ I have installed is the 2015 version for the 32-bits.

What else can I do?

http://imgur.com/a/9826x

Look this image, I have the installed programs and the error message still.

Like I told you, I don't have any other MS C++ installed.

Please, can you help me?

Thank you.

Show 40 post(s) from this thread on one page