Advanced Paladin Shooter

[Bollo]

Hello,

I've found several "Advanced Paladin Shooters", but they all seem to be about being PvP-Safe with Paladin spells.

I'm looking for a script that is basically the same, but which also takes into account whether the ammo has been fired or not (as with the "Sync with spells"-option in WB).

Paladins looses way too much damage if this is not taken into account.

Im sure there must be some script like this somewhere?

Regards
Bollo

[Cisco]

Hello,

I've found several "Advanced Paladin Shooters", but they all seem to be about being PvP-Safe with Paladin spells.

I'm looking for a script that is basically the same, but which also takes into account whether the ammo has been fired or not (as with the "Sync with spells"-option in WB).

Paladins looses way too much damage if this is not taken into account.

Im sure there must be some script like this somewhere?

Regards
Bollo

I finished doing this persistent today. It might work for you. I use it daily.

Order of preference of the use of spells ==> MaSan(exevo mas san) ---> GranCon(exori gran con) ---> Con(exori con), if radius >= 5 ---> San(exori san), if radius <= 4

I intend in the future to add the option to launch rune.

The pvp option has never tested, since I never played in pvp, so I do not know if it will work.

--Attack Pally

auto(100)



local monsters = {'name 1', 'name 2'} --if wind 10 ==> {'Name'} or {'name'}.....if wind 11, only {'name'}

local HuntSections = {"Hunt"} --for example...{'Hunt'}....{'Floor 1', 'Floor 2'}

local pvp = false --check pvp

local MasSan = true --exevo mas san

local numberMonsters = 3 --monsters for mas san

local GranCon = true --exori gran con

local Con = true --exori con

local San = true --exori san

--Option

local LancerBeetle = false



----------------------------------------

if $connected then

	if table.find(HuntSections, $wptsection) then

		if MasSan and cancastspell('exevo mas san') and $level >= 50 and maroundspell('exevo mas san', '3x3', unpack(monsters)) >= numberMonsters and $mp >= 1300 and (paround(7) == 0 or not pvp) and $attacked.isshootable then

			pausewalking(300)

			cast('exevo mas san')

			wait(300)

		elseif table.find(monsters, $attacked.name) and $attacked.isshootable then

			if GranCon and cancastspell('exori gran con') and $level >= 90 or ($attacked.dist >= 1 and (paround(3) > 0 and pvp)) then

				cast('exori gran con')

				wait(300)

			elseif Con and cancastspell('exori con') and $level >= 23 and $attacked.dist >= 5 or ($attacked.dist >= 1 and (paround(3) > 0 and pvp)) then

				cast('exori con')

				wait(300)

			elseif San and cancastspell('exori san') and $level >= 40 then

				cast('exori san')

				wait(300)

			end

		end

	end

	if LancerBeetle then

		if maround(5, 'Lancer Beetle') >= 4 and cancastspell('exevo mas san') and maroundspell('exevo mas san', 'any', 'Lancer Beetle') >= 4 and (paround(7) == 0 or not pvp) then

			pausewalking(300)

			cast('exevo mas san')

			wait(300)

		end

	end 

end

[Cisco]

@Bollo

Added Rune, I haven't tested it yet.

Order of preference of the use of spells ==> MaSan(exevo mas san) ---> Rune ---> GranCon(exori gran con) ---> Con(exori con), if radius >= 5 ---> San(exori san), if radius <= 4

--Attack Pally

auto(100)



local monsters = {'name 1', 'name 2'} --if wind 10 ==> {'Name'} or {'name'}.....if wind 11, only {'name'}

local HuntSections = {"Hunt"} --for example...{'Hunt'}....{'Floor 1', 'Floor 2'}

local pvp = false --check pvp

local MasSan = true --exevo mas san

local Rune = false --check use rune

local RuneType = 'avalanche rune'

local numberMonsters = 3 --monsters for mas san or rune

local GranCon = true --exori gran con

local Con = true --exori con

local San = true --exori san

--Option

local LancerBeetle = false

local RuneLancerBeetle = false



----------------------------------------

local AttackRune = getarearunetile(not pvp, unpack(monsters))



if $connected then

	if table.find(HuntSections, $wptsection) then

		if MasSan and cancastspell('exevo mas san') and $level >= 50 and maroundspell('exevo mas san', '3x3', unpack(monsters)) >= numberMonsters and $mp >= 1300 and (paround(7) == 0 or not pvp) and $attacked.isshootable then

			pausewalking(300)

			cast('exevo mas san')

			wait(300)

		elseif Rune and itemcount(RuneType) > 0 and cancastspell(RuneType) and AttackRune.amount >= numberMonsters and $mp > 1300 and (paround(10) == 0 or not pvp) and $attacked.isshootable then

			pausewalking(300)

			useitemon(RuneType, 0, AttackRune.tile)

			wait(300)

		elseif table.find(monsters, $attacked.name) and $attacked.isshootable then

			if GranCon and cancastspell('exori gran con') and $level >= 90 or ($attacked.dist >= 1 and (paround(3) > 0 and pvp)) then

				cast('exori gran con')

				wait(300)

			elseif Con and cancastspell('exori con') and $level >= 23 and $attacked.dist >= 5 or ($attacked.dist >= 1 and (paround(3) > 0 and pvp)) then

				cast('exori con')

				wait(300)

			elseif San and cancastspell('exori san') and $level >= 40 then

				cast('exori san')

				wait(300)

			end

		end

	end

	if LancerBeetle then

		if maround(5, 'Lancer Beetle') >= 4 then

			if MasSan and cancastspell('exevo mas san') and maroundspell('exevo mas san', 'any', 'Lancer Beetle') >= 4 and (paround(7) == 0 or not pvp) and $attacked.isshootable then

				pausewalking(300)

				cast('exevo mas san')

				wait(300)

			elseif RuneLancerBeetle and itemcount(RuneType) > 0 and cancastspell(RuneType) and AttackRune.amount >= numberMonsters and (paround(10) == 0 or not pvp) and $attacked.isshootable then

				pausewalking(300)

				useitemon(RuneType, 0, AttackRune.tile)

				wait(300)

			end

		end

	end 

end

[Josh]

Hello,

I've found several "Advanced Paladin Shooters", but they all seem to be about being PvP-Safe with Paladin spells.

I'm looking for a script that is basically the same, but which also takes into account whether the ammo has been fired or not (as with the "Sync with spells"-option in WB).

Paladins looses way too much damage if this is not taken into account.

Im sure there must be some script like this somewhere?

Regards
Bollo

I'm not sure that there is but I feel like @Cisco is about to implement one!

Basically what you need to do is to check for new projectiles using this iterator, if you loop at say 100ms then when you find a new projectile of the right type shoot a spell and wait 200 or so ms, it should do the trick.

[Imba]

Just set spells in targeting instead of casting them by action

[Cisco]

I'm not sure that there is but I feel like @Cisco is about to implement one!

Basically what you need to do is to check for new projectiles using this iterator, if you loop at say 100ms then when you find a new projectile of the right type shoot a spell and wait 200 or so ms, it should do the trick.

I thought of doing it this way...

--Attack Pally

auto(200)

...blablabla



foreach  newprojectile  p  do

	if p.type == 32 and (p.tox == $posx) and (p.toy == $posy) and (p.fromx == $posx) and (p.fromy == $posy) then

		...blablabla

The documentation says 32 is sudden death rune, where will I get the other numbers?


The Imba option seems tempting too.

[Bollo]

Just set spells in targeting instead of casting them by action

Well yes thats the obvious choice and what Im doing atm, but I want to optimize paladins to the max as with any other vocation, hence the request.

[Josh]

I thought of doing it this way...

--Attack Pally

auto(200)

...blablabla



foreach  newprojectile  p  do

	if p.type == 32 and (p.tox == $posx) and (p.toy == $posy) and (p.fromx == $posx) and (p.fromy == $posy) then

		...blablabla

The documentation says 32 is sudden death rune, where will I get the other numbers?


The Imba option seems tempting too.

Best way would be to see if you can work them out, just have a persistent running to print them to console and shoot an arrow, see what occurs... It should be pretty clear as long as it's only you and 1 target which isn't shooting projectiles

[Imba]

Well yes thats the obvious choice and what Im doing atm, but I want to optimize paladins to the max as with any other vocation, hence the request.

And why do you think using buil-in targeting isnt optimized?

[Cisco]

Best way would be to see if you can work them out, just have a persistent running to print them to console and shoot an arrow, see what occurs... It should be pretty clear as long as it's only you and 1 target which isn't shooting projectiles

I found in the folder tibiadata > projectiles.xml

Could you look and see if it's all right? I just tested and it worked fine but I do not know if there is anything else to add to improve or not.

--Attack Pally

auto(100)



--Settings

local monstersArea = {'name 1', 'name 2'} --consider mas san, rune

local monsters = {'name 1', 'name 2'} --consider exori gran con, exori con, exori san

local HuntSections = {'Hunt'} --for example...{'Hunt'}....{'Floor 1', 'Floor 2'}

--Spells Areas (exevo mas san and runes)

local MasSan = true --exevo mas san

local Rune = false --check use rune

local RuneType = 'avalanche rune'

local numberMonsters = 3 --monsters for mas san, rune

local MP = 70 --percentage mp cast mas san, rune

--Single Atk (exori gran con, exori con and exori san)

local SmartAttack = true --automatically check if the monster is weaker to physical and holy, ==ONLY NO-PVP==

local GranCon = true --exori gran con

local Con = true --exori con

local San = true --exori san

--Option

local LancerBeetle = false

local RuneLancerBeetle = false

--PVP

local pvp = false --check pvp

local pvpDistance = 10 --check players around, if checked pvp

local SafeListPvp = {'char 1', 'char 2'}



----------------------------------------

local AttackRune = getarearunetile(unpack(monstersArea))

local SmartAtk = creatureinfo(unpack(monsters))



if $connected then

	if table.find(HuntSections, $wptsection) then

		foreach newprojectile p do

			if table.find({1, 2, 3, 7, 8, 9, 14, 16, 19, 21, 22, 23, 24, 33, 34, 35, 40, 45, 48, 49, 50, 51}, p.type) and (p.fromx == $posx) and (p.fromy == $posy) and cooldown(SPELL_GROUP_ATTACK) == 0 then

				if MasSan and cancastspell('exevo mas san') and ($level >= 50) and maroundspell('exevo mas san', '3x3', unpack(monstersArea)) >= numberMonsters and ($mppc >= MP) and not pvp or (pvp and paroundfloorignore(pvpDistance, 1, unpack(SafeListPvp)) == 0) and $attacked.isshootable then

					pausewalking(300)

					cast('exevo mas san')

					wait(300,500)

				elseif Rune and (itemcount(RuneType) > 0) and cancastspell(RuneType) and (AttackRune.amount >= numberMonsters) and ($mppc > MP) and not pvp or (pvp and paroundfloorignore(pvpDistance, 1, unpack(SafeListPvp)) == 0) and $attacked.isshootable then

					pausewalking(300)

					useitemon(RuneType, 0, AttackRune.tile)

					wait(300,500)

				elseif table.find(monsters, $attacked.name) and $attacked.isshootable then

					if GranCon and cancastspell('exori gran con') and ($level >= 90) and (not SmartAttack or (SmartAttack and (SmartAtk.physicalmod > SmartAtk.holymod))) then

						cast('exori gran con')

						wait(300,500)

					elseif Con and cancastspell('exori con') and ($level >= 23) and ($attacked.dist >= 5) and (not SmartAttack or (SmartAttack and (SmartAtk.physicalmod > SmartAtk.holymod))) then

						cast('exori con')

						wait(300,500)

					elseif San and cancastspell('exori san') and ($level >= 40) and ($attacked.dist <= 4) and not pvp or (pvp and paroundfloorignore(pvpDistance, 1, unpack(SafeListPvp)) == 0) and (not SmartAttack or (SmartAttack and (SmartAtk.holymod > SmartAtk.physicalmod))) then

						cast('exori san')

						wait(300,500)

					end

				end

			end

		end

	end

	if LancerBeetle then

		if maround(5, 'Lancer Beetle') >= 4 then

			if MasSan and cancastspell('exevo mas san') and ($level >= 50) and maroundspell('exevo mas san', 'any', 'Lancer Beetle') >= 4 and not pvp or (pvp and paroundfloorignore(pvpDistance, 1, unpack(SafeListPvp)) == 0) and $attacked.isshootable then

				pausewalking(300)

				cast('exevo mas san')

				wait(300,500)

			elseif RuneLancerBeetle and itemcount(RuneType) > 0 and cancastspell(RuneType) and AttackRune.amount >= numberMonsters and not pvp or (pvp and paroundfloorignore(pvpDistance, 1, unpack(SafeListPvp)) == 0) and $attacked.isshootable then

				pausewalking(300)

				useitemon(RuneType, 0, AttackRune.tile)

				wait(300,500)

			end

		end

	end 

end